Nanohenries to Microhenries
Convert nanohenries to microhenries (nH to µH). 1 nH = 0.001 µH. Use the calculator, formula and conversion table.
How to convert nanohenries to microhenries
Multiply the amount in nanohenries by 0.001 to get microhenries. The displayed factor and results are rounded to 12 significant digits.
µH = nH × 0.001Worked example
1 nH = 0.001 µH. Change the amount in the calculator above to use your own value.
Units and assumptions
Uses henries and decimal SI prefixes for non-negative inductance magnitudes. This does not infer a component’s current rating, saturation, coupling or frequency-dependent behaviour. Values are rounded to 12 significant figures for display.
Calculator results use floating-point arithmetic and are rounded for display. The reference table below uses up to 12 significant digits.
Nanohenries to Microhenries table
| Nanohenries (nH) | Microhenries (µH) |
|---|---|
| 0 | 0 |
| 1 | 0.001 |
| 5 | 0.005 |
| 10 | 0.01 |
| 25 | 0.025 |
| 100 | 0.1 |
| 1,000 | 1 |
About this conversion
What is the formula for nanohenries to microhenries?
µH = nH × 0.001. Multiply the amount in nanohenries by 0.001 to get microhenries. The displayed factor and results are rounded to 12 significant digits.
How do I convert back to nanohenries?
Use the microhenries to nanohenries calculator to reverse this conversion. You can also use Swap units in the calculator above.
Can I use a different pair of units?
Choose another unit in the calculator, or open the inductance converter to browse all supported pairs.