Square inches per second to Stokes
Convert square inches per second to stokes (in²/s to St). 1 in²/s = 6.4516 St. Use the calculator, formula and conversion table.
How to convert square inches per second to stokes
Multiply the amount in square inches per second by 6.4516 to get stokes. The displayed factor and results are rounded to 12 significant digits.
St = in²/s × 6.4516Worked example
1 in²/s = 6.4516 St. Change the amount in the calculator above to use your own value.
Units and assumptions
Uses square metres per second. One centistokes is 1 mm²/s, and one stokes is 1 cm²/s. Dynamic viscosity is a different quantity and needs density to convert between the two. Values are rounded to 12 significant figures for display.
Calculator results use floating-point arithmetic and are rounded for display. The reference table below uses up to 12 significant digits.
Square inches per second to Stokes table
| Square inches per second (in²/s) | Stokes (St) |
|---|---|
| 0 | 0 |
| 1 | 6.4516 |
| 5 | 32.258 |
| 10 | 64.516 |
| 25 | 161.29 |
| 100 | 645.16 |
| 1,000 | 6,451.6 |
About this conversion
What is the formula for square inches per second to stokes?
St = in²/s × 6.4516. Multiply the amount in square inches per second by 6.4516 to get stokes. The displayed factor and results are rounded to 12 significant digits.
How do I convert back to square inches per second?
Use the stokes to square inches per second calculator to reverse this conversion. You can also use Swap units in the calculator above.
Can I use a different pair of units?
Choose another unit in the calculator, or open the kinematic viscosity converter to browse all supported pairs.