Pounds-force per foot to Dynes per centimetre
Convert pounds-force per foot to dynes per centimetre (lbf/ft to dyn/cm). 1 lbf/ft = 14,593.9029372 dyn/cm. Use the calculator, formula and conversion table.
How to convert pounds-force per foot to dynes per centimetre
Multiply the amount in pounds-force per foot by 14,593.9029372 to get dynes per centimetre. The displayed factor and results are rounded to 12 significant digits.
dyn/cm = lbf/ft × 14,593.9029372Worked example
1 lbf/ft = 14,593.9029372 dyn/cm. Change the amount in the calculator above to use your own value.
Units and assumptions
Uses newtons per metre. One dyne per centimetre equals one millinewton per metre. Pound-force uses standard gravity; this converts a supplied surface tension without predicting its dependence on temperature or composition. Values are rounded to 12 significant figures for display.
Calculator results use floating-point arithmetic and are rounded for display. The reference table below uses up to 12 significant digits.
Pounds-force per foot to Dynes per centimetre table
| Pounds-force per foot (lbf/ft) | Dynes per centimetre (dyn/cm) |
|---|---|
| 0 | 0 |
| 1 | 14,593.9029372 |
| 5 | 72,969.514686 |
| 10 | 145,939.029372 |
| 25 | 364,847.57343 |
| 100 | 1,459,390.29372 |
| 1,000 | 14,593,902.9372 |
About this conversion
What is the formula for pounds-force per foot to dynes per centimetre?
dyn/cm = lbf/ft × 14,593.9029372. Multiply the amount in pounds-force per foot by 14,593.9029372 to get dynes per centimetre. The displayed factor and results are rounded to 12 significant digits.
How do I convert back to pounds-force per foot?
Use the dynes per centimetre to pounds-force per foot calculator to reverse this conversion. You can also use Swap units in the calculator above.
Can I use a different pair of units?
Choose another unit in the calculator, or open the surface tension converter to browse all supported pairs.