Imperial gallons per minute to Cubic feet per second
Convert imperial gallons per minute to cubic feet per second (imp gal/min to ft³/s). 1 imp gal/min = 0.00267572755393 ft³/s. Use the calculator, formula and conversion table.
How to convert imperial gallons per minute to cubic feet per second
Multiply the amount in imperial gallons per minute by 0.00267572755393 to get cubic feet per second. The displayed factor and results are rounded to 12 significant digits.
ft³/s = imp gal/min × 0.00267572755393Worked example
1 imp gal/min = 0.00267572755393 ft³/s. Change the amount in the calculator above to use your own value.
Units and assumptions
Uses cubic metres per second. US liquid gallons are 3.785411784 litres; imperial gallons are 4.54609 litres. CFM uses international cubic feet. These are volume rates at the stated conditions; standard gas flow and mass flow need additional conditions or density. Values are rounded to 12 significant figures for display.
Calculator results use floating-point arithmetic and are rounded for display. The reference table below uses up to 12 significant digits.
Imperial gallons per minute to Cubic feet per second table
| Imperial gallons per minute (imp gal/min) | Cubic feet per second (ft³/s) |
|---|---|
| 0 | 0 |
| 1 | 0.00267572755393 |
| 5 | 0.0133786377697 |
| 10 | 0.0267572755393 |
| 25 | 0.0668931888483 |
| 100 | 0.267572755393 |
| 1,000 | 2.67572755393 |
About this conversion
What is the formula for imperial gallons per minute to cubic feet per second?
ft³/s = imp gal/min × 0.00267572755393. Multiply the amount in imperial gallons per minute by 0.00267572755393 to get cubic feet per second. The displayed factor and results are rounded to 12 significant digits.
How do I convert back to imperial gallons per minute?
Use the cubic feet per second to imperial gallons per minute calculator to reverse this conversion. You can also use Swap units in the calculator above.
Can I use a different pair of units?
Choose another unit in the calculator, or open the volumetric flow converter to browse all supported pairs.