Litres per second to Cubic metres per hour
Convert litres per second to cubic metres per hour (L/s to m³/h). 1 L/s = 3.6 m³/h. Use the calculator, formula and conversion table.
How to convert litres per second to cubic metres per hour
Multiply the amount in litres per second by 3.6 to get cubic metres per hour. The displayed factor and results are rounded to 12 significant digits.
m³/h = L/s × 3.6Worked example
1 L/s = 3.6 m³/h. Change the amount in the calculator above to use your own value.
Units and assumptions
Uses cubic metres per second. US liquid gallons are 3.785411784 litres; imperial gallons are 4.54609 litres. CFM uses international cubic feet. These are volume rates at the stated conditions; standard gas flow and mass flow need additional conditions or density. Values are rounded to 12 significant figures for display.
Calculator results use floating-point arithmetic and are rounded for display. The reference table below uses up to 12 significant digits.
Litres per second to Cubic metres per hour table
| Litres per second (L/s) | Cubic metres per hour (m³/h) |
|---|---|
| 0 | 0 |
| 1 | 3.6 |
| 5 | 18 |
| 10 | 36 |
| 25 | 90 |
| 100 | 360 |
| 1,000 | 3,600 |
About this conversion
What is the formula for litres per second to cubic metres per hour?
m³/h = L/s × 3.6. Multiply the amount in litres per second by 3.6 to get cubic metres per hour. The displayed factor and results are rounded to 12 significant digits.
How do I convert back to litres per second?
Use the cubic metres per hour to litres per second calculator to reverse this conversion. You can also use Swap units in the calculator above.
Can I use a different pair of units?
Choose another unit in the calculator, or open the volumetric flow converter to browse all supported pairs.