US liquid gallons per minute to Cubic metres per second
Convert us liquid gallons per minute to cubic metres per second (US gal/min to m³/s). 1 US gal/min = 0.0000630901964 m³/s. Use the calculator, formula and conversion table.
How to convert us liquid gallons per minute to cubic metres per second
Multiply the amount in us liquid gallons per minute by 0.0000630901964 to get cubic metres per second. The displayed factor and results are rounded to 12 significant digits.
m³/s = US gal/min × 0.0000630901964Worked example
1 US gal/min = 0.0000630901964 m³/s. Change the amount in the calculator above to use your own value.
Units and assumptions
Uses cubic metres per second. US liquid gallons are 3.785411784 litres; imperial gallons are 4.54609 litres. CFM uses international cubic feet. These are volume rates at the stated conditions; standard gas flow and mass flow need additional conditions or density. Values are rounded to 12 significant figures for display.
Calculator results use floating-point arithmetic and are rounded for display. The reference table below uses up to 12 significant digits.
US liquid gallons per minute to Cubic metres per second table
| US liquid gallons per minute (US gal/min) | Cubic metres per second (m³/s) |
|---|---|
| 0 | 0 |
| 1 | 0.0000630901964 |
| 5 | 0.000315450982 |
| 10 | 0.000630901964 |
| 25 | 0.00157725491 |
| 100 | 0.00630901964 |
| 1,000 | 0.0630901964 |
About this conversion
What is the formula for us liquid gallons per minute to cubic metres per second?
m³/s = US gal/min × 0.0000630901964. Multiply the amount in us liquid gallons per minute by 0.0000630901964 to get cubic metres per second. The displayed factor and results are rounded to 12 significant digits.
How do I convert back to us liquid gallons per minute?
Use the cubic metres per second to us liquid gallons per minute calculator to reverse this conversion. You can also use Swap units in the calculator above.
Can I use a different pair of units?
Choose another unit in the calculator, or open the volumetric flow converter to browse all supported pairs.