Square metres per second to Stokes
Convert square metres per second to stokes (m²/s to St). 1 m²/s = 10,000 St. Use the calculator, formula and conversion table.
How to convert square metres per second to stokes
Multiply the amount in square metres per second by 10,000 to get stokes. The displayed factor and results are rounded to 12 significant digits.
St = m²/s × 10,000Worked example
1 m²/s = 10,000 St. Change the amount in the calculator above to use your own value.
Units and assumptions
Uses square metres per second. One centistokes is 1 mm²/s, and one stokes is 1 cm²/s. Dynamic viscosity is a different quantity and needs density to convert between the two. Values are rounded to 12 significant figures for display.
Calculator results use floating-point arithmetic and are rounded for display. The reference table below uses up to 12 significant digits.
Square metres per second to Stokes table
| Square metres per second (m²/s) | Stokes (St) |
|---|---|
| 0 | 0 |
| 1 | 10,000 |
| 5 | 50,000 |
| 10 | 100,000 |
| 25 | 250,000 |
| 100 | 1,000,000 |
| 1,000 | 10,000,000 |
About this conversion
What is the formula for square metres per second to stokes?
St = m²/s × 10,000. Multiply the amount in square metres per second by 10,000 to get stokes. The displayed factor and results are rounded to 12 significant digits.
How do I convert back to square metres per second?
Use the stokes to square metres per second calculator to reverse this conversion. You can also use Swap units in the calculator above.
Can I use a different pair of units?
Choose another unit in the calculator, or open the kinematic viscosity converter to browse all supported pairs.