Stokes to Square metres per second
Convert stokes to square metres per second (St to m²/s). 1 St = 0.0001 m²/s. Use the calculator, formula and conversion table.
How to convert stokes to square metres per second
Multiply the amount in stokes by 0.0001 to get square metres per second. The displayed factor and results are rounded to 12 significant digits.
m²/s = St × 0.0001Worked example
1 St = 0.0001 m²/s. Change the amount in the calculator above to use your own value.
Units and assumptions
Uses square metres per second. One centistokes is 1 mm²/s, and one stokes is 1 cm²/s. Dynamic viscosity is a different quantity and needs density to convert between the two. Values are rounded to 12 significant figures for display.
Calculator results use floating-point arithmetic and are rounded for display. The reference table below uses up to 12 significant digits.
Stokes to Square metres per second table
| Stokes (St) | Square metres per second (m²/s) |
|---|---|
| 0 | 0 |
| 1 | 0.0001 |
| 5 | 0.0005 |
| 10 | 0.001 |
| 25 | 0.0025 |
| 100 | 0.01 |
| 1,000 | 0.1 |
About this conversion
What is the formula for stokes to square metres per second?
m²/s = St × 0.0001. Multiply the amount in stokes by 0.0001 to get square metres per second. The displayed factor and results are rounded to 12 significant digits.
How do I convert back to stokes?
Use the square metres per second to stokes calculator to reverse this conversion. You can also use Swap units in the calculator above.
Can I use a different pair of units?
Choose another unit in the calculator, or open the kinematic viscosity converter to browse all supported pairs.